- 非IC关键词
企业档案
- 相关证件：
- 会员类型：普通会员
- 李福玲
- 电话：0757-23329891
- 手机：13928227597
- 桂彩英
- 电话：0757-23329892
- 手机：13600320568
- 地址：广东省佛山市顺德区陈村镇广隆工业园区兴业三路2号3楼
- 传真：0757-23329893
- E-mail：elaine@worldwalk.com.tw
友情链接
产品信息
1.General
1.1Application: This specification is applied to potentiometers used for electronic
equipment.
1.2Standard atmospheric conditions
Unless otherwise specified,the standard range of atmospheric conditions for making
measurements and test is per the following limits:
Ambient temperature ：15℃ to 35℃
Relative humidity ：25% to 75%
Air pressure ：86 kpa to 106 kpa
1.3Operating temperature range ：-10℃ to +50℃
1.4Storage temperature range ：-15℃ to +70℃
1.5Suggested storage period ：About 6 months
2．Electronic Specification :
|
|
Item |
Conditions |
Specifications |
|
2.1 |
Total resistance |
Measurement shall be made by the resistance between terminal 1 and 3 with lever settled at terminal 1 or 3. |
20 KΩ |
|
2.2 |
Resistance Characteristics Availability angle |
|
90° |
|
2.3 |
Total resistance tolerance |
|
±20% |
|
2.4 |
Resistance taper |
Measurement shall be made by the resistance law method.Measurement stall be made at the position of right diagram from the edge at the side of terminal 1.When based on terminal 3. from the edge at the side of terminal 3.
Out voltage between terminals2and3 --------------------------------------------------- X 100% Applied voltage between terminals 1and 3 |
JB |
|
2.5 |
Residual Resistance |
1.Opens when the switch 2. Full ccw & Full cw |
Max10Ω |
2．Electronic Specification :
|
|
Item |
Conditions |
Specifications |
|
2.7 |
Rated voltage |
Rated voltage E=√P.R (V) P: power rating R: nominal total resistance When the rated voltage exceeds the maximum operating voltage, the maximum operating voltage shall be the rated voltage |
AC 200 V |
|
2.8 |
Rotational noise |
Dc 20V,when the rated voltage is 20v or less, its rated voltageShall be applied to the terminals between 1 and 3.And then the Procedures, refer to IEC 393-1-4.15 Traveling speed:20=/sec |
Less than 47mV |
|
2.9 |
Insulation resistance |
A voltage of 500vAC shall be applied for1min,after which measurement shall be made |
100 MΩor more |
|
2.10 |
Withstand voltage |
Trip curr ant:2mA Measuring frequency:50/60Hz 500V AC for 1min. |
Without damage to parts, Arcing or breakdown etc |
3. Mechanical Specification :
|
|
Item |
Conditions |
Specifications |
|
3.1 |
Total rotation angle |
|
120°±10° |
|
3.2 |
Rotation torque |
|
200∽500gf.cm |
|
3.3 |
Rotation Stop Strength |
|
5kgf.cm Min |
|
3.4 |
Rotation life |
|
200,000 Cycles Min |
4. Soldering conditions
4.1 Manual soldering :
Temperature of soldering iron ：300℃or less.
Application time of soldering iron :within 3s.
4.2 Dip Soldering
Printed wiring board: Single-sided copper clad laminate board with
thickness of 1.6mm .
■Dimensions尺寸图/P.C.B.mounting hole detail 线路板安装孔尺寸图
